diff --git a/docs/docs.tex b/docs/docs.tex
index 3aeebd7..2352e47 100644
--- a/docs/docs.tex
+++ b/docs/docs.tex
@@ -11,17 +11,17 @@
 
 \vspace{2cm}
 \begin{center}
-    \includegraphics[width=0.5\linewidth]{../assets/logo.jpg}
+	\includegraphics[width=0.5\linewidth]{../assets/logo.jpg}
 \end{center}
 
 
 \vspace{5cm}
 \begin{center}
-    \begin{Large}
-        \textsc{Usage guide for Version 2.0.0}
-    \end{Large}
+	\begin{Large}
+		\textsc{Usage guide for Version 2.0.0}
+	\end{Large}
 
-    \hlurl{https://git.janishutz.com/janishutz/latex}
+	\hlurl{https://git.janishutz.com/janishutz/latex}
 \end{center}
 
 
diff --git a/docs/parts/intro.tex b/docs/parts/intro.tex
index 268bba4..7d724e4 100644
--- a/docs/parts/intro.tex
+++ b/docs/parts/intro.tex
@@ -3,7 +3,7 @@
 This set of \LaTeX files is designed to give you a good looking, pre-configured \LaTeX setup, which helps you get started much more quickly.
 
 There are quite a lot of configuration options, but it is likely that more are to come in the future.
-If you have any suggestions as to what should be added, don't hesitate to open a \hlhref{https://support.janishutz.com?a=add}{support ticket}\ 
+If you have any suggestions as to what should be added, don't hesitate to open a \hlhref{https://support.janishutz.com?a=add}{support ticket}\
 or contacting me via email to \texttt{development@janishutz.com}.
 
 
diff --git a/docs/parts/reference/cs.tex b/docs/parts/reference/cs.tex
index a2bf0e6..199046a 100644
--- a/docs/parts/reference/cs.tex
+++ b/docs/parts/reference/cs.tex
@@ -2,16 +2,16 @@
 \subsection{CS-Commands}
 These commands have to be executed inside math environment
 \begin{itemize}
-    \item \verb|\tct| Time complexity in $\tct{}$-notation (average case)
-    \item \verb|\tco| Time complexity in $\tco{}$-notation (worst case / upper bound)
-    \item \verb|\tcl| Time complexity in $\tcl{}$-notation (best case / lower bound)
-    \item \verb|\t[R, C, N]| Simply prints a capital R, C or N in math mode as normal text. So e.g. use $\tR$ to print an R
-    \item \verb|\wordbool| Prints $\wordbool$
-    \item \verb|\words|\{\textit{string}\} Prints $\words{test}$
-    \item \verb|\wordm|\{\textit{math}\} Prints $\wordm{1}$
-    \item \verb|\word| Prints $\word$
-    \item \verb|\alphabets|\{\textit{string}\} Prints $\alphabets{test}$
-    \item \verb|\alphabetbool| Prints $\alphabetbool$
+	\item \verb|\tct| Time complexity in $\tct{}$-notation (average case)
+	\item \verb|\tco| Time complexity in $\tco{}$-notation (worst case / upper bound)
+	\item \verb|\tcl| Time complexity in $\tcl{}$-notation (best case / lower bound)
+	\item \verb|\t[R, C, N]| Simply prints a capital R, C or N in math mode as normal text. So e.g. use $\tR$ to print an R
+	\item \verb|\wordbool| Prints $\wordbool$
+	\item \verb|\words|\{\textit{string}\} Prints $\words{test}$
+	\item \verb|\wordm|\{\textit{math}\} Prints $\wordm{1}$
+	\item \verb|\word| Prints $\word$
+	\item \verb|\alphabets|\{\textit{string}\} Prints $\alphabets{test}$
+	\item \verb|\alphabetbool| Prints $\alphabetbool$
 \end{itemize}
 
 \subsubsection{Algorithms}
@@ -24,9 +24,9 @@ These commands have to be executed inside math environment
 \end{minted}
 
 \begin{algo}{functionName(A)}
-    \Procedure{functionName}{$(A)$}
-        \State\Return "Hello World"
-    \EndProcedure
+	\Procedure{functionName}{$(A)$}
+	\State\Return "Hello World"
+	\EndProcedure
 \end{algo}
 
 
@@ -47,19 +47,19 @@ This is nothing different than a wrapper for a minted environment with a box dra
 Example (in python):
 
 \begin{code}{python}
-    def hello_world():
-    print("hello world!")
+	def hello_world():
+	print("hello world!")
 \end{code}
 
 
 \paragraph{Code in separate files}
 It is also possible to load code from a source file using the provided commands:
 \begin{itemize}
-    \item \verb|\inputcode|\{\textit{language}\}\{\textit{file}\}, where \textit{language} is the programming language
-          and \textit{file} is the file name of the file to be loaded, relative to the main tex file.
-    \item \verb|\inputcodewithfilename|\{\textit{language}\}\{\textit{hidden-path}\}\{\textit{shown-path}\}, where \textit{language} is the programming language,
-          \textit{hidden-path} is the part of the path you want to hide of the file to be loaded, relative to the main tex file
-          and \textit{shown-path} is the displayed part.
+	\item \verb|\inputcode|\{\textit{language}\}\{\textit{file}\}, where \textit{language} is the programming language
+	      and \textit{file} is the file name of the file to be loaded, relative to the main tex file.
+	\item \verb|\inputcodewithfilename|\{\textit{language}\}\{\textit{hidden-path}\}\{\textit{shown-path}\}, where \textit{language} is the programming language,
+	      \textit{hidden-path} is the part of the path you want to hide of the file to be loaded, relative to the main tex file
+	      and \textit{shown-path} is the displayed part.
 \end{itemize}
 \inlineexample
 \begin{minted}{latex}
diff --git a/docs/parts/reference/intro.tex b/docs/parts/reference/intro.tex
index 0d02ae9..560869f 100644
--- a/docs/parts/reference/intro.tex
+++ b/docs/parts/reference/intro.tex
@@ -2,10 +2,10 @@
 \section{Full Command Reference}
 \subsection{Variables}
 \begin{itemize}
-    \item \textit{string}: Any normal text
-    \item \textit{boolean}: \texttt{true} or \texttt{false}
-    \item \textit{math}: Any math input
-    \item \textit{number}: Any non-negative integer, i.e. no commas
-    \item \textit{color}: Any of the \texttt{dvipsnames} colours of \texttt{xcolor} or as defined in the color config file
+	\item \textit{string}: Any normal text
+	\item \textit{boolean}: \texttt{true} or \texttt{false}
+	\item \textit{math}: Any math input
+	\item \textit{number}: Any non-negative integer, i.e. no commas
+	\item \textit{color}: Any of the \texttt{dvipsnames} colours of \texttt{xcolor} or as defined in the color config file
 \end{itemize}
 
diff --git a/docs/parts/reference/loading.tex b/docs/parts/reference/loading.tex
index fbeb125..8194cf3 100644
--- a/docs/parts/reference/loading.tex
+++ b/docs/parts/reference/loading.tex
@@ -1,56 +1,56 @@
 \subsection{Per-File config}
 \label{sec:perFileConf}
 \begin{itemize}
-    \item \verb|\renewcommand{\authorTitle}|\{\textit{string}\} Change the author (in the title) for this document only
-    \item \verb|\renewcommand{\authorHeaders}|\{\textit{string}\} Change the author (in the header) for this document only
-    \item \verb|\renewcommand{\<descriptor>NamingDE}|\{\textit{string}\} Configure translations for descriptors on the fly (for DE)
-    \item \verb|\renewcommand{\<descriptor>NamingEN}|\{\textit{string}\} Configure translations for descriptors on the fly (for EN)
-    \item \verb|\setnumberingpreset|\{\textit{string}\}
-          Change the numbering preset of definitions, lemmas, etc for this document.
-          Value can be \texttt{off}, \texttt{separate}, \texttt{combined}.
-    \item \verb|\renewcommand{<descriptor>numbering}|\{\textit{string}\}
-          Change the numbering for an individual descriptor, passed as first argument.
-          The second value can be \texttt{off}, \texttt{separate}, \texttt{combined} or \texttt{default}.
-          If set to \texttt{default}, it will follow the \verb|\numberingpreset| setting.
-          If you do not override it here, it will follow your global config as set in the config directory
-          and if unset there, it will follow the \verb|\numberingpreset| setting.
-    \item \verb|\renew|\{\textit{string}\} Change the format of the numbering of definitions, etc.
-          The value can be set to any of the below
-          \begin{itemize}[noitemsep]
-              \item none = $<$section$>$.$<$number$>$
-              \item section = $<$section$>$.$<$number$>$
-              \item subsection = $<$section$>$.$<$subsection$>$.$<$number$>$
-              \item subsubsection = $<$section$>$.$<$subsection$>$.$<$subsubsection$>$.$<$number$>$
-              \item paragraph = $<$section$>$.$<$subsection$>$.$<$subsubsection$>$.$<$paragraph$>$.$<$number$>$
-          \end{itemize}
-          Changing this won't affect all of numbering prior to the command, only after. You can change this setting (and the ones above) at any point in the document
-    \item \verb|\setcounter{descriptorShadeStrength}|\{\textit{number}\} Change the colour saturation of the inline descriptors
-    \item \verb|\setcounter{shadeStrength}|\{\textit{number}\} Change the colour saturation of the \verb|\shade| command
-    \item \verb|\loadGerman| Load german configuration. Needs to be in preamble and you may only use it once
-    \item To change the font for the entire document, load the font package using \verb|\usepackage|, with the last occurrence of a font package determining the active one.
-          Then select the type by using \verb|\setFontType|\textit{\{mono $|$ serif $|$ sans\}}.
-          A list of fonts is available \color{Cyan}\href{https://www.overleaf.com/learn/latex/Font_typefaces#Reference_guide}{here}\color{black}.
-          You may change the font only for a specific section, by enclosing \verb|\setFont| and the text that should be written in said typeface in curly braces.
+	\item \verb|\renewcommand{\authorTitle}|\{\textit{string}\} Change the author (in the title) for this document only
+	\item \verb|\renewcommand{\authorHeaders}|\{\textit{string}\} Change the author (in the header) for this document only
+	\item \verb|\renewcommand{\<descriptor>NamingDE}|\{\textit{string}\} Configure translations for descriptors on the fly (for DE)
+	\item \verb|\renewcommand{\<descriptor>NamingEN}|\{\textit{string}\} Configure translations for descriptors on the fly (for EN)
+	\item \verb|\setnumberingpreset|\{\textit{string}\}
+	      Change the numbering preset of definitions, lemmas, etc for this document.
+	      Value can be \texttt{off}, \texttt{separate}, \texttt{combined}.
+	\item \verb|\renewcommand{<descriptor>numbering}|\{\textit{string}\}
+	      Change the numbering for an individual descriptor, passed as first argument.
+	      The second value can be \texttt{off}, \texttt{separate}, \texttt{combined} or \texttt{default}.
+	      If set to \texttt{default}, it will follow the \verb|\numberingpreset| setting.
+	      If you do not override it here, it will follow your global config as set in the config directory
+	      and if unset there, it will follow the \verb|\numberingpreset| setting.
+	\item \verb|\renew|\{\textit{string}\} Change the format of the numbering of definitions, etc.
+	      The value can be set to any of the below
+	      \begin{itemize}[noitemsep]
+		      \item none = $<$section$>$.$<$number$>$
+		      \item section = $<$section$>$.$<$number$>$
+		      \item subsection = $<$section$>$.$<$subsection$>$.$<$number$>$
+		      \item subsubsection = $<$section$>$.$<$subsection$>$.$<$subsubsection$>$.$<$number$>$
+		      \item paragraph = $<$section$>$.$<$subsection$>$.$<$subsubsection$>$.$<$paragraph$>$.$<$number$>$
+	      \end{itemize}
+	      Changing this won't affect all of numbering prior to the command, only after. You can change this setting (and the ones above) at any point in the document
+	\item \verb|\setcounter{descriptorShadeStrength}|\{\textit{number}\} Change the colour saturation of the inline descriptors
+	\item \verb|\setcounter{shadeStrength}|\{\textit{number}\} Change the colour saturation of the \verb|\shade| command
+	\item \verb|\loadGerman| Load german configuration. Needs to be in preamble and you may only use it once
+	\item To change the font for the entire document, load the font package using \verb|\usepackage|, with the last occurrence of a font package determining the active one.
+	      Then select the type by using \verb|\setFontType|\textit{\{mono $|$ serif $|$ sans\}}.
+	      A list of fonts is available \color{Cyan}\href{https://www.overleaf.com/learn/latex/Font_typefaces#Reference_guide}{here}\color{black}.
+	      You may change the font only for a specific section, by enclosing \verb|\setFont| and the text that should be written in said typeface in curly braces.
 \end{itemize}
 \subsubsection{Letters}
 \begin{itemize}
-    \item \verb|\renewcommand{\name}|\{\textit{string}\} Change the name (for letters) for this document only
-    \item \verb|\renewcommand{\street}|\{\textit{string}\} Change the street (for letters) for this document only
-    \item \verb|\renewcommand{\city}|\{\textit{string}\} Change the city (for letters) for this document only
-    \item \verb|\renewcommand{\countrycode}|\{\textit{string}\} Change the country-code (for letters) for this document only
+	\item \verb|\renewcommand{\name}|\{\textit{string}\} Change the name (for letters) for this document only
+	\item \verb|\renewcommand{\street}|\{\textit{string}\} Change the street (for letters) for this document only
+	\item \verb|\renewcommand{\city}|\{\textit{string}\} Change the city (for letters) for this document only
+	\item \verb|\renewcommand{\countrycode}|\{\textit{string}\} Change the country-code (for letters) for this document only
 \end{itemize}
 
 \newpage
 \subsection{Setup, Loading \& Translation}
 \begin{itemize}
-    \item \verb|\setup|\{\textit{string}\} Prepare the document with the \textit{string} being the title
-    \item \verb|\setupCheatSheet|[\textit{boolean}]\{\textit{string}\} Prepare the document with smaller borders and no headers / footers.
-          The mandatory argument is the title, the optional argument will, if set to \texttt{true} use a landscape layout (default)
-          and a horizontal layout if set to \texttt{false}.
-    \item \verb|\setupBarebones|\{\textit{string}\} Minimal setup, only borders and title set
-    \item \verb|\startDocument| Initialize the document. Has to be called after \verb|\begin{document}|
-    \item \verb|\translate|\{\textit{string}\}\{\textit{string}\} First \textit{string} is English, second \textit{string} is German. Switches automatically based on language selected
-    \item \verb|\tr|\{\textit{string}\}\{\textit{string}\} Shorthand for \verb|\translate|
-    \item \verb|\numberingOn| Turn on the numbering (if previously turned off using \verb|\numberingOff| or set in the config)
-    \item \verb|\numberingOff| Turn off the numbering (useful to temporarily turn off numbering)
+	\item \verb|\setup|\{\textit{string}\} Prepare the document with the \textit{string} being the title
+	\item \verb|\setupCheatSheet|[\textit{boolean}]\{\textit{string}\} Prepare the document with smaller borders and no headers / footers.
+	      The mandatory argument is the title, the optional argument will, if set to \texttt{true} use a landscape layout (default)
+	      and a horizontal layout if set to \texttt{false}.
+	\item \verb|\setupBarebones|\{\textit{string}\} Minimal setup, only borders and title set
+	\item \verb|\startDocument| Initialize the document. Has to be called after \verb|\begin{document}|
+	\item \verb|\translate|\{\textit{string}\}\{\textit{string}\} First \textit{string} is English, second \textit{string} is German. Switches automatically based on language selected
+	\item \verb|\tr|\{\textit{string}\}\{\textit{string}\} Shorthand for \verb|\translate|
+	\item \verb|\numberingOn| Turn on the numbering (if previously turned off using \verb|\numberingOff| or set in the config)
+	\item \verb|\numberingOff| Turn off the numbering (useful to temporarily turn off numbering)
 \end{itemize}
diff --git a/docs/parts/reference/math.tex b/docs/parts/reference/math.tex
index 62aa5bb..5f1bebe 100644
--- a/docs/parts/reference/math.tex
+++ b/docs/parts/reference/math.tex
@@ -2,29 +2,29 @@
 \subsection{Math-Commands}
 All these have to be executed in the math environment.
 \begin{itemize}
-    \item \verb|\R| Prints $\R$. Same goes for \verb|\C| printing $\C$, etc.
-    \item \verb|\floor|\{\textit{math}\} Round down symbol, e.g. $\floor{n}$
-    \item \verb|\ceil|\{\textit{math}\} Round up symbol, e.g. $\ceil{n}$
-    \item \verb|\Leftrightarrowequiv| Equivalence transformation symbol, $\Leftrightarrowequiv$.
-    \item \verb|\Rightarrowequiv| Equivalence transformation symbol, $\Rightarrowequiv$.
-    \item \verb|\Leftarrowequiv| Equivalence transformation symbol, $\Leftarrowequiv$.
-    \item \verb|\defAs| Define as, i.e. $\defAs$
-    \item \verb|\defEquiv| Define as, but with a two-sided implication instead of equality, i.e. $\defEquiv$
-    \item \verb|\defImplies| Define as, but with one-sided implication, i.e. $\defImplies$
-    \item \verb|\divider| Divider or divides symbol, e.g. $a \divider b$
-    \item \verb|\lcm| Least common multiple, $\lcm$
-    \item \verb|\arcsinh| Inverse of hyperbolic sine, $\arcsinh$
-    \item \verb|\arccosh| Inverse of hyperbolic cosine, $\arccosh$
-    \item \verb|\arctanh| Inverse of hyperbolic tangent, $\arctanh$
-    \item \verb|\limit|\{\textit{math}\}\{\textit{math}\} Shortened limit notation, $\displaystyle \limit{x}{x_0}$
-    \item \verb|\limni| Shortened limit notation for $n \rightarrow \infty$, $\displaystyle \limni$
-    \item \verb|\liminfni| Shortened limit inferior notation for $n \rightarrow \infty$, $\displaystyle \liminfni$
-    \item \verb|\limsupni| Shortened limit superior notation for $n \rightarrow \infty$, $\displaystyle \limsupni$
-    \item \verb|\diff|\{\textit{math}\} Derivative, $\displaystyle \diff{x}$
-    \item \verb|\diffn|\{\textit{math}\}\{\textit{math}\} Higher derivative, $\displaystyle \diffn{x}{2}$
-    \item \verb|\pardiff|\{\textit{math}\} Partial derivative, $\displaystyle \pardiff{x}$
-    \item \verb|\pardiffn|\{\textit{math}\}\{\textit{math}\} Higher partial derivative, $\displaystyle \pardiffn{x}{2}$
-    \item \verb|\elementstack|\{\textit{math}\}\{\textit{math}\} Stack two elements on top of eachother. Uses \verb|\genfrac| under the hood.
-          Can be used for example in limits as an alternative to \verb|\atop| or \verb|\substack|.
+	\item \verb|\R| Prints $\R$. Same goes for \verb|\C| printing $\C$, etc.
+	\item \verb|\floor|\{\textit{math}\} Round down symbol, e.g. $\floor{n}$
+	\item \verb|\ceil|\{\textit{math}\} Round up symbol, e.g. $\ceil{n}$
+	\item \verb|\Leftrightarrowequiv| Equivalence transformation symbol, $\Leftrightarrowequiv$.
+	\item \verb|\Rightarrowequiv| Equivalence transformation symbol, $\Rightarrowequiv$.
+	\item \verb|\Leftarrowequiv| Equivalence transformation symbol, $\Leftarrowequiv$.
+	\item \verb|\defAs| Define as, i.e. $\defAs$
+	\item \verb|\defEquiv| Define as, but with a two-sided implication instead of equality, i.e. $\defEquiv$
+	\item \verb|\defImplies| Define as, but with one-sided implication, i.e. $\defImplies$
+	\item \verb|\divider| Divider or divides symbol, e.g. $a \divider b$
+	\item \verb|\lcm| Least common multiple, $\lcm$
+	\item \verb|\arcsinh| Inverse of hyperbolic sine, $\arcsinh$
+	\item \verb|\arccosh| Inverse of hyperbolic cosine, $\arccosh$
+	\item \verb|\arctanh| Inverse of hyperbolic tangent, $\arctanh$
+	\item \verb|\limit|\{\textit{math}\}\{\textit{math}\} Shortened limit notation, $\displaystyle \limit{x}{x_0}$
+	\item \verb|\limni| Shortened limit notation for $n \rightarrow \infty$, $\displaystyle \limni$
+	\item \verb|\liminfni| Shortened limit inferior notation for $n \rightarrow \infty$, $\displaystyle \liminfni$
+	\item \verb|\limsupni| Shortened limit superior notation for $n \rightarrow \infty$, $\displaystyle \limsupni$
+	\item \verb|\diff|\{\textit{math}\} Derivative, $\displaystyle \diff{x}$
+	\item \verb|\diffn|\{\textit{math}\}\{\textit{math}\} Higher derivative, $\displaystyle \diffn{x}{2}$
+	\item \verb|\pardiff|\{\textit{math}\} Partial derivative, $\displaystyle \pardiff{x}$
+	\item \verb|\pardiffn|\{\textit{math}\}\{\textit{math}\} Higher partial derivative, $\displaystyle \pardiffn{x}{2}$
+	\item \verb|\elementstack|\{\textit{math}\}\{\textit{math}\} Stack two elements on top of eachother. Uses \verb|\genfrac| under the hood.
+	      Can be used for example in limits as an alternative to \verb|\atop| or \verb|\substack|.
 \end{itemize}
 
diff --git a/docs/parts/reference/style/descriptors.tex b/docs/parts/reference/style/descriptors.tex
index 83b0eb3..9d65323 100644
--- a/docs/parts/reference/style/descriptors.tex
+++ b/docs/parts/reference/style/descriptors.tex
@@ -4,30 +4,30 @@ See \ref{sec:counters} for a guide on how to change the current number.
 
 \paragraph{Inline}
 \begin{tables}{ll}{Command              & Output}
-              \verb|\inlineexample|     & \inlineexample     \\
-              \verb|\inlinedefinition|  & \inlinedefinition  \\
-              \verb|\inlinetheorem|     & \inlinetheorem     \\
-              \verb|\inlinelemma|       & \inlinelemma       \\
-              \verb|\inlinecorollary|   & \inlinecorollary   \\
-              \verb|\inlineproposition| & \inlineproposition \\
-              \verb|\inlinefact|        & \inlinefact        \\
-              \verb|\inlineaxiom|       & \inlineaxiom       \\
-              \verb|\inlineremark|      & \inlineremark      \\
-              \verb|\inlineproof|       & \inlineproof       \\
+	\verb|\inlineexample|     & \inlineexample     \\
+	\verb|\inlinedefinition|  & \inlinedefinition  \\
+	\verb|\inlinetheorem|     & \inlinetheorem     \\
+	\verb|\inlinelemma|       & \inlinelemma       \\
+	\verb|\inlinecorollary|   & \inlinecorollary   \\
+	\verb|\inlineproposition| & \inlineproposition \\
+	\verb|\inlinefact|        & \inlinefact        \\
+	\verb|\inlineaxiom|       & \inlineaxiom       \\
+	\verb|\inlineremark|      & \inlineremark      \\
+	\verb|\inlineproof|       & \inlineproof       \\
 \end{tables}
 
 \paragraph{Shortened}
 \begin{tables}{ll}{Command             & Output}
-              \verb|\shortexample|     & \shortexample     \\
-              \verb|\shortdefinition|  & \shortdefinition  \\
-              \verb|\shorttheorem|     & \shorttheorem     \\
-              \verb|\shortlemma|       & \shortlemma       \\
-              \verb|\shortcorollary|   & \shortcorollary   \\
-              \verb|\shortproposition| & \shortproposition \\
-              \verb|\shortfact|        & \shortfact        \\
-              \verb|\shortaxiom|       & \shortaxiom       \\
-              \verb|\shortremark|      & \shortremark      \\
-              \verb|\shortproof|       & \shortproof       \\
+	\verb|\shortexample|     & \shortexample     \\
+	\verb|\shortdefinition|  & \shortdefinition  \\
+	\verb|\shorttheorem|     & \shorttheorem     \\
+	\verb|\shortlemma|       & \shortlemma       \\
+	\verb|\shortcorollary|   & \shortcorollary   \\
+	\verb|\shortproposition| & \shortproposition \\
+	\verb|\shortfact|        & \shortfact        \\
+	\verb|\shortaxiom|       & \shortaxiom       \\
+	\verb|\shortremark|      & \shortremark      \\
+	\verb|\shortproof|       & \shortproof       \\
 \end{tables}
 
 \newpage
diff --git a/docs/parts/reference/style/intro.tex b/docs/parts/reference/style/intro.tex
index 8425d00..b177714 100644
--- a/docs/parts/reference/style/intro.tex
+++ b/docs/parts/reference/style/intro.tex
@@ -1,9 +1,9 @@
 \newpage
 \subsection{Style}
 \begin{itemize}
-    \item \verb|\TODO| Print a highlighted \TODO
-    \item \verb|\background|\{\textit{color}\}\{\textit{number}\}\{\textit{string}\} Print \background{ForestGreen}{50}{shaded text, with colour saturation}
-    \item \verb|\shade|\{\textit{color}\}\{\textit{string}\} Print \shade{ForestGreen}{shaded text}
-    \item \verb|\backdrop|\{\textit{string}\} Print \backdrop{text with gray backdrop}
-    \item \verb|\printtoc|\{\textit{color}\} Print the table of contents (as seen on the first page). The normal \verb|\tableofcontents| still works as expected
+	\item \verb|\TODO| Print a highlighted \TODO
+	\item \verb|\background|\{\textit{color}\}\{\textit{number}\}\{\textit{string}\} Print \background{ForestGreen}{50}{shaded text, with colour saturation}
+	\item \verb|\shade|\{\textit{color}\}\{\textit{string}\} Print \shade{ForestGreen}{shaded text}
+	\item \verb|\backdrop|\{\textit{string}\} Print \backdrop{text with gray backdrop}
+	\item \verb|\printtoc|\{\textit{color}\} Print the table of contents (as seen on the first page). The normal \verb|\tableofcontents| still works as expected
 \end{itemize}
diff --git a/docs/parts/reference/style/spacing.tex b/docs/parts/reference/style/spacing.tex
index 5a589d1..8e766df 100644
--- a/docs/parts/reference/style/spacing.tex
+++ b/docs/parts/reference/style/spacing.tex
@@ -2,24 +2,24 @@
 For spacing in math mode, prefer using the methods described \hlhref{https://www.overleaf.com/learn/latex/Spacing_in_math_mode}{here},
 for vertical spacing prefer the commands described below
 \begin{itemize}
-    \item \verb|\smallhspace| Prints a 2mm hspace
-    \item \verb|\mediumhspace| Prints a 5mm hspace
-    \item \verb|\largehspace| Prints a 10mm = 1cm hspace
-    \item \verb|\rmvspace|[\textit{number}] Removes an amount of vertical space. Should not be used unless can be avoided with general settings. Defaults to 0.5
+	\item \verb|\smallhspace| Prints a 2mm hspace
+	\item \verb|\mediumhspace| Prints a 5mm hspace
+	\item \verb|\largehspace| Prints a 10mm = 1cm hspace
+	\item \verb|\rmvspace|[\textit{number}] Removes an amount of vertical space. Should not be used unless can be avoided with general settings. Defaults to 0.5
 \end{itemize}
 
 Vertical spacing config for the entire document. By default, the \LaTeX\ defaults are used.
 \begin{itemize}
-    \item \verb|\noverticalspacing|
-    \item \verb|\smallverticalspacing|
-    \item \verb|\mediumverticalspacing| (approximately the same as the \LaTeX defaults)
-    \item \verb|\largeverticalspacing|
+	\item \verb|\noverticalspacing|
+	\item \verb|\smallverticalspacing|
+	\item \verb|\mediumverticalspacing| (approximately the same as the \LaTeX defaults)
+	\item \verb|\largeverticalspacing|
 \end{itemize}
 You are of course free to redefine commands like \verb|\parskip|, etc to your liking, these commands are just provided for your convenience.
 See \hlhref{https://www.overleaf.com/learn/latex/\%5Cabovedisplayskip_and_related_commands}{here}\ for more details
 and \hlhref{https://latex-tutorial.com/latex-space/}{here for a good guide on spacing}.
 
-To control paragraph spacing, see \hlhref{https://mirror.ox.ac.uk/sites/ctan.org/macros/latex/contrib/parskip/parskip.pdf}{here}\ 
+To control paragraph spacing, see \hlhref{https://mirror.ox.ac.uk/sites/ctan.org/macros/latex/contrib/parskip/parskip.pdf}{here}\
 and \hlhref{https://www.overleaf.com/learn/latex/Articles/How_to_change_paragraph_spacing_in_LaTeX}{here}
 
 To make use of \TeX's automatic wrapping of short alignment environments, use the \texttt{aligned}
@@ -32,11 +32,11 @@ Below a demonstration on the effects of the different settings:
 
 This is text:
 \[
-    \int_{0}^{10} 4x^2 + 3x \cdot \frac{3 \ln(10)}{x^3} \dx x
+	\int_{0}^{10} 4x^2 + 3x \cdot \frac{3 \ln(10)}{x^3} \dx x
 \]
 This is very long introductory text that exceeds the limit (same applies to long equations)
 \[
-    \int_{0}^{10} 4x^2 + 3x \cdot \frac{3 \ln(10)}{x^3} \dx x
+	\int_{0}^{10} 4x^2 + 3x \cdot \frac{3 \ln(10)}{x^3} \dx x
 \]
 Text following the equation (no paragraph break!)
 
@@ -45,11 +45,11 @@ Text following the equation (no paragraph break!)
 
 This is text:
 \[
-    \int_{0}^{10} 4x^2 + 3x \cdot \frac{3 \ln(10)}{x^3} \dx x
+	\int_{0}^{10} 4x^2 + 3x \cdot \frac{3 \ln(10)}{x^3} \dx x
 \]
 This is very long introductory text that exceeds the limit (same applies to long equations)
 \[
-    \int_{0}^{10} 4x^2 + 3x \cdot \frac{3 \ln(10)}{x^3} \dx x
+	\int_{0}^{10} 4x^2 + 3x \cdot \frac{3 \ln(10)}{x^3} \dx x
 \]
 Text following the equation (no paragraph break!)
 
@@ -58,11 +58,11 @@ Text following the equation (no paragraph break!)
 
 This is text:
 \[
-    \int_{0}^{10} 4x^2 + 3x \cdot \frac{3 \ln(10)}{x^3} \dx x
+	\int_{0}^{10} 4x^2 + 3x \cdot \frac{3 \ln(10)}{x^3} \dx x
 \]
 This is very long introductory text that exceeds the limit (same applies to long equations)
 \[
-    \int_{0}^{10} 4x^2 + 3x \cdot \frac{3 \ln(10)}{x^3} \dx x
+	\int_{0}^{10} 4x^2 + 3x \cdot \frac{3 \ln(10)}{x^3} \dx x
 \]
 Text following the equation (no paragraph break!)
 
@@ -71,10 +71,10 @@ Text following the equation (no paragraph break!)
 
 This is text:
 \[
-    \int_{0}^{10} 4x^2 + 3x \cdot \frac{3 \ln(10)}{x^3} \dx x
+	\int_{0}^{10} 4x^2 + 3x \cdot \frac{3 \ln(10)}{x^3} \dx x
 \]
 This is very long introductory text that exceeds the limit (same applies to long equations)
 \[
-    \int_{0}^{10} 4x^2 + 3x \cdot \frac{3 \ln(10)}{x^3} \dx x
+	\int_{0}^{10} 4x^2 + 3x \cdot \frac{3 \ln(10)}{x^3} \dx x
 \]
 Text following the equation (no paragraph break!)
diff --git a/docs/parts/reference/style/tcolorbox/counter.tex b/docs/parts/reference/style/tcolorbox/counter.tex
index 9655378..6837c7f 100644
--- a/docs/parts/reference/style/tcolorbox/counter.tex
+++ b/docs/parts/reference/style/tcolorbox/counter.tex
@@ -5,7 +5,7 @@ These ones also have two settings, namely, you can change the counter behaviour
 See \ref{sec:counters} for a guide on how to change the current number and how to reference them.
 
 \begin{definition}[]{Title here}
-    \begin{minted}{latex}
+	\begin{minted}{latex}
         \begin{definition}[]{Title here}
             
         \end{definition}
@@ -13,7 +13,7 @@ See \ref{sec:counters} for a guide on how to change the current number and how t
 \end{definition}
 
 \begin{theorem}[]{Title here}
-    \begin{minted}{latex}
+	\begin{minted}{latex}
         \begin{theorem}[]{Title here}
             
         \end{theorem}
@@ -21,7 +21,7 @@ See \ref{sec:counters} for a guide on how to change the current number and how t
 \end{theorem}
 
 \begin{lemma}[]{Title here}
-    \begin{minted}{latex}
+	\begin{minted}{latex}
         \begin{lemma}[]{Title here}
             
         \end{lemma}
@@ -29,7 +29,7 @@ See \ref{sec:counters} for a guide on how to change the current number and how t
 \end{lemma}
 
 \begin{corollary}[]{Title here}
-    \begin{minted}{latex}
+	\begin{minted}{latex}
         \begin{corollary}[]{Title here}
             
         \end{corollary}
@@ -37,7 +37,7 @@ See \ref{sec:counters} for a guide on how to change the current number and how t
 \end{corollary}
 
 \begin{proposition}[]{Title here}
-    \begin{minted}{latex}
+	\begin{minted}{latex}
         \begin{proposition}[]{Title here}
             
         \end{proposition}
@@ -45,7 +45,7 @@ See \ref{sec:counters} for a guide on how to change the current number and how t
 \end{proposition}
 
 \begin{fact}[]{Title here}
-    \begin{minted}{latex}
+	\begin{minted}{latex}
         \begin{fact}[]{Title here}
             
         \end{fact}
@@ -53,7 +53,7 @@ See \ref{sec:counters} for a guide on how to change the current number and how t
 \end{fact}
 
 \begin{axiom}[]{Title here}
-    \begin{minted}{latex}
+	\begin{minted}{latex}
         \begin{axiom}[]{Title here}
             
         \end{axiom}
@@ -61,7 +61,7 @@ See \ref{sec:counters} for a guide on how to change the current number and how t
 \end{axiom}
 
 \begin{example}[]{Title here}
-    \begin{minted}{latex}
+	\begin{minted}{latex}
         \begin{example}[]{Title here}
             
         \end{example}
@@ -69,7 +69,7 @@ See \ref{sec:counters} for a guide on how to change the current number and how t
 \end{example}
 
 \begin{remark}[]{Title here}
-    \begin{minted}{latex}
+	\begin{minted}{latex}
         \begin{remark}[]{Title here}
             
         \end{remark}
@@ -77,7 +77,7 @@ See \ref{sec:counters} for a guide on how to change the current number and how t
 \end{remark}
 
 \begin{formula}[]{Title here}
-    \begin{minted}{latex}
+	\begin{minted}{latex}
         \begin{formula}[]{Title here}
             
         \end{formula}
diff --git a/docs/parts/reference/style/tcolorbox/default.tex b/docs/parts/reference/style/tcolorbox/default.tex
index 32eab31..9b3c24d 100644
--- a/docs/parts/reference/style/tcolorbox/default.tex
+++ b/docs/parts/reference/style/tcolorbox/default.tex
@@ -4,7 +4,7 @@
 These tcolorboxes can be created using the code displayed inside them.
 
 \begin{terms}[]{Title here}
-    \begin{minted}{latex}
+	\begin{minted}{latex}
         \begin{terms}[]{Title here}
             
         \end{terms}
@@ -12,7 +12,7 @@ These tcolorboxes can be created using the code displayed inside them.
 \end{terms}
 
 \begin{notation}[]{Title here}
-    \begin{minted}{latex}
+	\begin{minted}{latex}
         \begin{notation}[]{Title here}
             
         \end{notation}
@@ -20,7 +20,7 @@ These tcolorboxes can be created using the code displayed inside them.
 \end{notation}
 
 \begin{recall}[]{Title here}
-    \begin{minted}{latex}
+	\begin{minted}{latex}
         \begin{recall}[]{Title here}
             
         \end{recall}
@@ -28,7 +28,7 @@ These tcolorboxes can be created using the code displayed inside them.
 \end{recall}
 
 \begin{usage}[]{Title here}
-    \begin{minted}{latex}
+	\begin{minted}{latex}
         \begin{usage}[]{Title here}
             
         \end{usage}
@@ -36,7 +36,7 @@ These tcolorboxes can be created using the code displayed inside them.
 \end{usage}
 
 \begin{properties}[]{Title here}
-    \begin{minted}{latex}
+	\begin{minted}{latex}
         \begin{properties}[]{Title here}
             
         \end{properties}
@@ -44,7 +44,7 @@ These tcolorboxes can be created using the code displayed inside them.
 \end{properties}
 
 \begin{restrictions}[]{Title here}
-    \begin{minted}{latex}
+	\begin{minted}{latex}
         \begin{restrictions}[]{Title here}
             
         \end{restrictions}
@@ -52,7 +52,7 @@ These tcolorboxes can be created using the code displayed inside them.
 \end{restrictions}
 
 \begin{limitations}[]{Title here}
-    \begin{minted}{latex}
+	\begin{minted}{latex}
         \begin{limitations}[]{Title here}
             
         \end{limitations}
@@ -60,7 +60,7 @@ These tcolorboxes can be created using the code displayed inside them.
 \end{limitations}
 
 \begin{intuition}[]{Title here}
-    \begin{minted}{latex}
+	\begin{minted}{latex}
         \begin{intuition}[]{Title here}
             
         \end{intuition}
diff --git a/docs/parts/reference/style/tcolorbox/other.tex b/docs/parts/reference/style/tcolorbox/other.tex
index 0ce3010..9e32437 100644
--- a/docs/parts/reference/style/tcolorbox/other.tex
+++ b/docs/parts/reference/style/tcolorbox/other.tex
@@ -2,9 +2,9 @@
 This tcolorbox has all the styles applied, but allows configuring the colour and both title boxes
 
 \begin{general}[]{title}{second title}{red}
-    This Tcolorbox is flexible and can take any main and secondary title, as well as any colour.
+	This Tcolorbox is flexible and can take any main and secondary title, as well as any colour.
 
-    \begin{minted}{latex}
+	\begin{minted}{latex}
         \begin{general}[]{title}{second title}{red}
             
         \end{general}
diff --git a/docs/parts/reference/tables-index.tex b/docs/parts/reference/tables-index.tex
index 627167b..9bb0283 100644
--- a/docs/parts/reference/tables-index.tex
+++ b/docs/parts/reference/tables-index.tex
@@ -1,6 +1,6 @@
 \newpage
 \subsection{Tables}
-You can set up nice looking tables using the \texttt{booktab} and \texttt{tabulary} environments. 
+You can set up nice looking tables using the \texttt{booktab} and \texttt{tabulary} environments.
 
 \textit{New as of October 28 2025:} Tables and figures are now also numbered according to your settings
 
@@ -12,7 +12,7 @@ You can set up nice looking tables using the \texttt{booktab} and \texttt{tabula
 
 This outputs as
 \begin{tables}{ll}{Left    & Right}
-              Left content & Right Content \\
+	Left content & Right Content \\
 \end{tables}
 
 This doesn't use the \texttt{table} environment, so no captions are possible, as to why there is also
@@ -27,7 +27,7 @@ This outputs as
 
 
 \begin{fullTable}{ll}{Left & Right}{This is a caption}
-    Left content & Right Content\\
+	Left content & Right Content\\
 \end{fullTable}
 
 
diff --git a/examples/letter/letter.tex b/examples/letter/letter.tex
index 9e96b2f..d462192 100644
--- a/examples/letter/letter.tex
+++ b/examples/letter/letter.tex
@@ -6,10 +6,10 @@
 \setkomavar{subject}{Test}
 \begin{document}\raggedright
 \begin{letter}{Company \\ Name \\ Address \\ CH-Place}
-    \opening{Intro}
+	\opening{Intro}
 
-    Test
+	Test
 
-    \closing{Kind regards}
+	\closing{Kind regards}
 \end{letter}
 \end{document}
diff --git a/janishutz-helpers.tex b/janishutz-helpers.tex
index 13db9f0..cedfbaa 100644
--- a/janishutz-helpers.tex
+++ b/janishutz-helpers.tex
@@ -92,72 +92,6 @@
 \colorlet{propertiescolor}{purple}
 
 
-% ┌                                                ┐
-% │                 General config                 │
-% └                                                ┘
-% Configure your author name here
-\newcommand{\authorTitle}{Janis Hutz\\\url{https://janishutz.com}}
-\newcommand{\authorHeaders}{Janis Hutz}
-
-
-% ┌                                                ┐
-% │                   Rendering                    │
-% └                                                ┘
-% Specify how the inline and short descriptors (e.g. Lemma, etc) are rendered. 
-% - #1 is the name of the descriptor
-% - #2 is the number (correctly rendered according to settings and preceded with space if not disabled)
-% - #3 is the name passed (non-empty asserted)
-\newcommand{\shortDescriptorTemplate}[3]{\bg{#1color}{\shortNamingTranslate{#1} #2} \textit{(#3)}}
-\newcommand{\inlineDescriptorTemplate}[3]{\bg{#1color}{\namingTranslate{#1} #2}: \textit{(#3)}}
-
-% These are used if no name is provided and argument #4 from above is the missing argument
-\newcommand{\anonymousShortDescriptorTemplate}[2]{\bg{#1color}{\shortNamingTranslate{#1} #2}}
-\newcommand{\anonymousInlineDescriptorTemplate}[2]{\bg{#1color}{\namingTranslate{#1} #2}}
-
-% background command config (draws a small box around the content)
-\newcommand{\backgroundPadding}{2pt}
-\newcommand{\backgroundRounding}{1pt}
-
-
-% ┌                                                ┐
-% │                   Numbering                    │
-% └                                                ┘
-% Set a preset, can be combined, separate or off.
-% If set to custom, all type specific commands need to be set below.
-\newcommand{\numberingpreset}{combined}
-
-% Specify how elements are to be numbered. Can be (X is the current number of the element):
-% - none (X)
-% - section (section.X)
-% - subsection (section.subsection.X)
-% - subsubsection (section.subsection.subsubsection.X)
-% - paragraph (section.subsection.subsubsection.paragraph.X)
-\newcommand{\subsectionnumbering}{subsection}
-
-
-% Set for a specific type. Can each be combined, separate, default or off:
-% If set to anything but 'default', it will override the overarching style
-% set by \numberingpreset
-\newcommand{\definitionnumbering}{default}
-\newcommand{\theoremnumbering}{default}
-\newcommand{\lemmanumbering}{default}
-\newcommand{\corollarynumbering}{default}
-\newcommand{\axiomnumbering}{default}
-\newcommand{\factnumbering}{default}
-\newcommand{\propositionnumbering}{default}
-\newcommand{\examplenumbering}{default}
-\newcommand{\formulanumbering}{default}
-\newcommand{\remarknumbering}{default}
-\newcommand{\proofnumbering}{default}
-\newcommand{\intuitionnumbering}{default}
-\newcommand{\termnumbering}{default}
-\newcommand{\notationnumbering}{default}
-\newcommand{\tasknumbering}{default}
-\newcommand{\usagenumbering}{default}
-\newcommand{\recallnumbering}{default}
-\newcommand{\propertiesnumbering}{default}
-
-
 % ┌                                                ┐
 % │                     Naming                     │
 % └                                                ┘
@@ -241,6 +175,72 @@
 \newcommand{\propertiesShortNamingDE}{Eig.}
 
 
+% ┌                                                ┐
+% │                   Numbering                    │
+% └                                                ┘
+% Set a preset, can be combined, separate or off.
+% If set to custom, all type specific commands need to be set below.
+\newcommand{\numberingpreset}{combined}
+
+% Specify how elements are to be numbered. Can be (X is the current number of the element):
+% - none (X)
+% - section (section.X)
+% - subsection (section.subsection.X)
+% - subsubsection (section.subsection.subsubsection.X)
+% - paragraph (section.subsection.subsubsection.paragraph.X)
+\newcommand{\subsectionnumbering}{subsection}
+
+
+% Set for a specific type. Can each be combined, separate, default or off:
+% If set to anything but 'default', it will override the overarching style
+% set by \numberingpreset
+\newcommand{\definitionnumbering}{default}
+\newcommand{\theoremnumbering}{default}
+\newcommand{\lemmanumbering}{default}
+\newcommand{\corollarynumbering}{default}
+\newcommand{\axiomnumbering}{default}
+\newcommand{\factnumbering}{default}
+\newcommand{\propositionnumbering}{default}
+\newcommand{\examplenumbering}{default}
+\newcommand{\formulanumbering}{default}
+\newcommand{\remarknumbering}{default}
+\newcommand{\proofnumbering}{default}
+\newcommand{\intuitionnumbering}{default}
+\newcommand{\termnumbering}{default}
+\newcommand{\notationnumbering}{default}
+\newcommand{\tasknumbering}{default}
+\newcommand{\usagenumbering}{default}
+\newcommand{\recallnumbering}{default}
+\newcommand{\propertiesnumbering}{default}
+
+
+% ┌                                                ┐
+% │                 General config                 │
+% └                                                ┘
+% Configure your author name here
+\newcommand{\authorTitle}{Janis Hutz\\\url{https://janishutz.com}}
+\newcommand{\authorHeaders}{Janis Hutz}
+
+
+% ┌                                                ┐
+% │                   Rendering                    │
+% └                                                ┘
+% Specify how the inline and short descriptors (e.g. Lemma, etc) are rendered. 
+% - #1 is the name of the descriptor
+% - #2 is the number (correctly rendered according to settings and preceded with space if not disabled)
+% - #3 is the name passed (non-empty asserted)
+\newcommand{\shortDescriptorTemplate}[3]{\bg{#1color}{\shortNamingTranslate{#1} #2} \textit{(#3)}}
+\newcommand{\inlineDescriptorTemplate}[3]{\bg{#1color}{\namingTranslate{#1} #2}: \textit{(#3)}}
+
+% These are used if no name is provided and argument #4 from above is the missing argument
+\newcommand{\anonymousShortDescriptorTemplate}[2]{\bg{#1color}{\shortNamingTranslate{#1} #2}}
+\newcommand{\anonymousInlineDescriptorTemplate}[2]{\bg{#1color}{\namingTranslate{#1} #2}}
+
+% background command config (draws a small box around the content)
+\newcommand{\backgroundPadding}{2pt}
+\newcommand{\backgroundRounding}{1pt}
+
+
 \newcounter{definitionnone}
 \newcounter{definitionsection}[section]
 \renewcommand{\thedefinitionsection}{\thesection.\arabic{definitionsection}}
@@ -687,6 +687,20 @@
 }
 
 
+% Add glossaries functionality
+
+\newcommand{\setupGlossary}{
+    \usepackage[nonumberlist, toc]{glossaries}
+    \usepackage[nottoc, numbib]{tocbibind}
+    \makenoidxglossaries
+}
+
+\newcommand{\printGlossary}{
+    \glsaddall
+    \printnoidxglossaries
+}
+
+
 % ┌                                                ┐
 % │                      Math                      │
 % └                                                ┘
@@ -828,93 +842,6 @@
 }
 
 
-% ┌                                                ┐
-% │                     Index                      │
-% └                                                ┘
-
-% For using index package
-\newcommand{\prepareIndex}{
-    \usepackage[T1]{fontenc}
-    \usepackage{imakeidx}
-    \makeindex
-}
-
-\newcommand{\addIndexBold}[1]{\textbf{\index{\MakeLowercase{#1}} #1}}
-\newcommand{\addIndexItalic}[1]{\textit{\index{\MakeLowercase{#1}} #1}}
-\newcommand{\addIndex}[1]{\index{\MakeLowercase{#1}} #1}
-
-
-
-% ┌                                                ┐
-% │                     Tables                     │
-% └                                                ┘
-
-\usepackage{booktabs}
-\usepackage{tabulary}
-
-% Create new table. #1 Layout, #2 title row
-\newenvironment{tables}[2]{
-    \begin{center}
-        \begin{tabular}{#1}
-            \toprule
-            #2 \\
-            \midrule
-            }{
-            \bottomrule
-        \end{tabular}
-    \end{center}
-}
-
-% Create new table in table env. #1 layout, #2 title row, #3 caption
-\newenvironment{fullTable}[3]{
-    \edef\tableCaption{#3}
-    \begin{table}[h!]
-        \begin{tables}{#1}{#2}
-            }{
-        \end{tables}
-        \caption{\tableCaption}
-    \end{table}
-}
-
-
-% Add glossaries functionality
-
-\newcommand{\setupGlossary}{
-    \usepackage[nonumberlist, toc]{glossaries}
-    \usepackage[nottoc, numbib]{tocbibind}
-    \makenoidxglossaries
-}
-
-\newcommand{\printGlossary}{
-    \glsaddall
-    \printnoidxglossaries
-}
-
-
-% ┌                                                ┐
-% │                  Translation                   │
-% └                                                ┘
-\newcommand{\translate}[2]{%
-    \ifthenelse{\equal{\currentLanguage}{en}}{#1}{#2}%
-}
-\newcommand{\tr}[2]{\translate{#1}{#2}}
-\newcommand{\namingTranslate}[1]{\translate{\printTranslationOptionEN{#1}}{\printTranslationOptionEN{#1}}}
-\newcommand{\shortNamingTranslate}[1]{\translate{\printShortTranslationOptionEN{#1}}{\printShortTranslationOptionEN{#1}}}
-
-% Translation aids (commonly used)
-\newcommand{\trif}{\translate{if }{falls }}
-\newcommand{\trIf}{\translate{If }{Falls }}
-\newcommand{\trLet}{\translate{Let }{Sei }}
-\newcommand{\trLets}{\translate{Let }{Seien }}
-\newcommand{\trFor}{\translate{For }{Für }}
-\newcommand{\trfor}{\translate{for }{für }}
-\newcommand{\trand}{\translate{and }{und }}
-\newcommand{\tror}{\translate{or }{oder }}
-\newcommand{\trst}{\translate{s.t. }{s.d. }}
-\newcommand{\trsuchthat}{\translate{such that }{so dass }}
-\newcommand{\trwith}{\translate{with }{mit }}
-
-
 % ┌                                                ┐
 % │                     Setup                      │
 % └                                                ┘
@@ -1008,6 +935,47 @@
 }
 
 
+% ┌                                                ┐
+% │                  Translation                   │
+% └                                                ┘
+\newcommand{\translate}[2]{%
+    \ifthenelse{\equal{\currentLanguage}{en}}{#1}{#2}%
+}
+\newcommand{\tr}[2]{\translate{#1}{#2}}
+\newcommand{\namingTranslate}[1]{\translate{\printTranslationOptionEN{#1}}{\printTranslationOptionEN{#1}}}
+\newcommand{\shortNamingTranslate}[1]{\translate{\printShortTranslationOptionEN{#1}}{\printShortTranslationOptionEN{#1}}}
+
+% Translation aids (commonly used)
+\newcommand{\trif}{\translate{if }{falls }}
+\newcommand{\trIf}{\translate{If }{Falls }}
+\newcommand{\trLet}{\translate{Let }{Sei }}
+\newcommand{\trLets}{\translate{Let }{Seien }}
+\newcommand{\trFor}{\translate{For }{Für }}
+\newcommand{\trfor}{\translate{for }{für }}
+\newcommand{\trand}{\translate{and }{und }}
+\newcommand{\tror}{\translate{or }{oder }}
+\newcommand{\trst}{\translate{s.t. }{s.d. }}
+\newcommand{\trsuchthat}{\translate{such that }{so dass }}
+\newcommand{\trwith}{\translate{with }{mit }}
+
+
+% ┌                                                ┐
+% │                     Index                      │
+% └                                                ┘
+
+% For using index package
+\newcommand{\prepareIndex}{
+    \usepackage[T1]{fontenc}
+    \usepackage{imakeidx}
+    \makeindex
+}
+
+\newcommand{\addIndexBold}[1]{\textbf{\index{\MakeLowercase{#1}} #1}}
+\newcommand{\addIndexItalic}[1]{\textit{\index{\MakeLowercase{#1}} #1}}
+\newcommand{\addIndex}[1]{\index{\MakeLowercase{#1}} #1}
+
+
+
 
 % ░▒█▀▀▄░▄▀▀▄░█▀▄▀█░▄▀▀▄░█░▒█░▀█▀░█▀▀░█▀▀▄░░░▒█▀▀▀█░█▀▄░░▀░░█▀▀░█▀▀▄░█▀▄░█▀▀
 % ░▒█░░░░█░░█░█░▀░█░█▄▄█░█░▒█░░█░░█▀▀░█▄▄▀░░░░▀▀▀▄▄░█░░░░█▀░█▀▀░█░▒█░█░░░█▀▀
@@ -1040,6 +1008,109 @@
 \newcommand{\class}{\text{\tr{Cl}{Kl}}}
 
 
+% ┌                                                ┐
+% │                     Tables                     │
+% └                                                ┘
+
+\usepackage{booktabs}
+\usepackage{tabulary}
+
+% Create new table. #1 Layout, #2 title row
+\newenvironment{tables}[2]{
+    \begin{center}
+        \begin{tabular}{#1}
+            \toprule
+            #2 \\
+            \midrule
+            }{
+            \bottomrule
+        \end{tabular}
+    \end{center}
+}
+
+% Create new table in table env. #1 layout, #2 title row, #3 caption
+\newenvironment{fullTable}[3]{
+    \edef\tableCaption{#3}
+    \begin{table}[h!]
+        \begin{tables}{#1}{#2}
+            }{
+        \end{tables}
+        \caption{\tableCaption}
+    \end{table}
+}
+
+
+% ┌                                                ┐
+% │               Counter numbering                │
+% └                                                ┘
+\newcommand{\preEnvHook}[1]{%
+    \stepLabelNumber{combined}%
+    \ifthenelse{\equal{\numberingpreset}{combined}}{%
+        \ifthenelse{\equal{\printNumberingConfigForDescriptor{#1}}{default}}{
+            \stepLabelNumber{combined}%
+        }{}%
+    }{%
+        \ifthenelse{\equal{\printNumberingConfigForDescriptor{#1}}{combined}}{%
+            \stepLabelNumber{combined}%
+        }{}%
+    }%
+}
+
+% Decides on the numbering to use (combined or not)
+\newcommand{\loadNumberingConfiguration}{%
+    \ifthenelse{\boolean{numberingDisabled}}{%
+        \renewcommand{\thetable}{\arabic{table}}
+        \renewcommand{\thefigure}{\arabic{figure}}
+    }{
+        \ifthenelse{\equal{\numberingpreset}{combined}}{%
+            \ifthenelse{\equal{\subsectionnumbering}{none}}{
+                \renewcommand{\thetable}{\arabic{combinednone}}
+                \renewcommand{\thefigure}{\arabic{combinednone}}
+            }{%
+                \renewcommand{\thetable}{\ssprinter.\arabic{combined\subsectionnumbering}}
+                \renewcommand{\thefigure}{\ssprinter.\arabic{combined\subsectionnumbering}}
+            }%
+        }{%
+            \ifthenelse{\equal{\numberingpreset}{separate}}{
+                \ifthenelse{\equal{\subsectionnumbering}{none}}{}{
+                    \renewcommand{\thetable}{\ssprinter.\arabic{table}}
+                    \renewcommand{\thefigure}{\ssprinter.\arabic{figure}}
+                }
+            }{%
+                \renewcommand{\thetable}{\arabic{table}}
+                \renewcommand{\thefigure}{\arabic{figure}}
+            }%
+        }%
+    }%
+}
+
+% Prints the preceding subsection numbers
+\newcommand{\ssprinter}{\thesection}
+\newcommand{\generateSubsection}{%
+    \ifthenelse{\equal{\subsectionnumbering}{section}}{%
+        \renewcommand{\ssprinter}{\thesection}
+    }{%
+        \ifthenelse{\equal{\subsectionnumbering}{subsection}}{%
+            \renewcommand{\ssprinter}{\thesubsection}
+        }{%
+            \ifthenelse{\equal{\subsectionnumbering}{subsubsection}}{%
+                \renewcommand{\ssprinter}{\thesubsubsection}
+            }{%
+                \ifthenelse{\equal{\subsectionnumbering}{paragraph}}{%
+                    \renewcommand{\ssprinter}{\theparagraph}
+                }{
+                    \renewcommand{\ssprinter}{}
+                }%
+            }%
+        }%
+    }%
+}
+\loadNumberingConfiguration
+
+\AtBeginEnvironment{table}{\preEnvHook{table}}
+\AtBeginEnvironment{figure}{\preEnvHook{figure}}
+
+
 % ── Set the current number of a label ───────────────────────────────
 \newcommand{\setLabelNumber}[2]{%
     \setcounter{#1none}{#2}%
@@ -1147,88 +1218,6 @@
 }
 
 
-% ┌                                                ┐
-% │               Counter numbering                │
-% └                                                ┘
-\newcommand{\preEnvHook}[1]{%
-    \stepLabelNumber{combined}%
-    \ifthenelse{\equal{\numberingpreset}{combined}}{%
-        \ifthenelse{\equal{\printNumberingConfigForDescriptor{#1}}{default}}{
-            \stepLabelNumber{combined}%
-        }{}%
-    }{%
-        \ifthenelse{\equal{\printNumberingConfigForDescriptor{#1}}{combined}}{%
-            \stepLabelNumber{combined}%
-        }{}%
-    }%
-}
-
-% Decides on the numbering to use (combined or not)
-\newcommand{\loadNumberingConfiguration}{%
-    \ifthenelse{\boolean{numberingDisabled}}{%
-        \renewcommand{\thetable}{\arabic{table}}
-        \renewcommand{\thefigure}{\arabic{figure}}
-    }{
-        \ifthenelse{\equal{\numberingpreset}{combined}}{%
-            \ifthenelse{\equal{\subsectionnumbering}{none}}{
-                \renewcommand{\thetable}{\arabic{combinednone}}
-                \renewcommand{\thefigure}{\arabic{combinednone}}
-            }{%
-                \renewcommand{\thetable}{\ssprinter.\arabic{combined\subsectionnumbering}}
-                \renewcommand{\thefigure}{\ssprinter.\arabic{combined\subsectionnumbering}}
-            }%
-        }{%
-            \ifthenelse{\equal{\numberingpreset}{separate}}{
-                \ifthenelse{\equal{\subsectionnumbering}{none}}{}{
-                    \renewcommand{\thetable}{\ssprinter.\arabic{table}}
-                    \renewcommand{\thefigure}{\ssprinter.\arabic{figure}}
-                }
-            }{%
-                \renewcommand{\thetable}{\arabic{table}}
-                \renewcommand{\thefigure}{\arabic{figure}}
-            }%
-        }%
-    }%
-}
-
-% Prints the preceding subsection numbers
-\newcommand{\ssprinter}{\thesection}
-\newcommand{\generateSubsection}{%
-    \ifthenelse{\equal{\subsectionnumbering}{section}}{%
-        \renewcommand{\ssprinter}{\thesection}
-    }{%
-        \ifthenelse{\equal{\subsectionnumbering}{subsection}}{%
-            \renewcommand{\ssprinter}{\thesubsection}
-        }{%
-            \ifthenelse{\equal{\subsectionnumbering}{subsubsection}}{%
-                \renewcommand{\ssprinter}{\thesubsubsection}
-            }{%
-                \ifthenelse{\equal{\subsectionnumbering}{paragraph}}{%
-                    \renewcommand{\ssprinter}{\theparagraph}
-                }{
-                    \renewcommand{\ssprinter}{}
-                }%
-            }%
-        }%
-    }%
-}
-\loadNumberingConfiguration
-
-\AtBeginEnvironment{table}{\preEnvHook{table}}
-\AtBeginEnvironment{figure}{\preEnvHook{figure}}
-
-
-% ┌                                                ┐
-% │                  STYLE: Math                   │
-% └                                                ┘
-
-% Add shortcuts to commonly used commands
-\newcommand{\vect}[1]{\overrightarrow{#1}}
-\renewcommand{\hat}[1]{\widehat{#1}}
-\renewcommand{\tilde}[1]{\widetilde{#1}}
-\newcommand{\proven}{$\hspace{17cm}\square$}
-
-
 \newcommand{\noverticalspacing}{
     \abovedisplayskip 1pt plus 2pt minus 1pt
     \belowdisplayskip 1pt plus 2pt minus 1pt
@@ -1255,40 +1244,6 @@
 }
 
 
-% ── Inline environments ─────────────────────────────────────────────
-% TODO: ref label generation
-\newcommand{\inline}[2][NONAME]{%
-    \ifthenelse{\equal{NONAME}{#1}}{%
-        \anonymousInlineDescriptorTemplate{#2}{\printLabel{#2}}%
-    }{%
-        \inlineDescriptorTemplate{#2}{\printLabel{#2}}{#1}%
-    }%
-}
-
-\newcommand{\labeledInline}[3][NONAME]{%
-    \edef{\tempLabel}{#3}
-    \label{\tempLabel}
-    \inline[#1]{#2}
-}
-
-\newcommand{\short}[2][NONAME]{%
-    \ifthenelse{\equal{NONAME}{#1}}{%
-        \anonymousShortDescriptorTemplate{#2}{\printLabel{#2}}%
-    }{%
-        \shortDescriptorTemplate{#2}{\printLabel{#2}}{#1}%
-    }%
-}
-
-\newcommand{\labeledShort}[3][NONAME]{%
-    \edef{\tempLabel}{#3}
-    \label{\tempLabel}
-    \short[#1]{#2}
-}
-
-\newcommand{\inlineproof}{\anonymousInlineDescriptorTemplate{proof}{}}
-\newcommand{\shortproof}{\anonymousShortDescriptorTemplate{proof}{}}
-
-
 % ┌                                                ┐
 % │           STYLE: Common tcolorboxes            │
 % └                                                ┘
@@ -1340,6 +1295,51 @@
 \newtcolorbox{simplebox}[2][]{colback=#2!5!white,colframe=#2!75!black,#1}
 
 
+% ── Inline environments ─────────────────────────────────────────────
+% TODO: ref label generation
+\newcommand{\inline}[2][NONAME]{%
+    \ifthenelse{\equal{NONAME}{#1}}{%
+        \anonymousInlineDescriptorTemplate{#2}{\printLabel{#2}}%
+    }{%
+        \inlineDescriptorTemplate{#2}{\printLabel{#2}}{#1}%
+    }%
+}
+
+\newcommand{\labeledInline}[3][NONAME]{%
+    \edef{\tempLabel}{#3}
+    \label{\tempLabel}
+    \inline[#1]{#2}
+}
+
+\newcommand{\short}[2][NONAME]{%
+    \ifthenelse{\equal{NONAME}{#1}}{%
+        \anonymousShortDescriptorTemplate{#2}{\printLabel{#2}}%
+    }{%
+        \shortDescriptorTemplate{#2}{\printLabel{#2}}{#1}%
+    }%
+}
+
+\newcommand{\labeledShort}[3][NONAME]{%
+    \edef{\tempLabel}{#3}
+    \label{\tempLabel}
+    \short[#1]{#2}
+}
+
+\newcommand{\inlineproof}{\anonymousInlineDescriptorTemplate{proof}{}}
+\newcommand{\shortproof}{\anonymousShortDescriptorTemplate{proof}{}}
+
+
+% ┌                                                ┐
+% │                  STYLE: Math                   │
+% └                                                ┘
+
+% Add shortcuts to commonly used commands
+\newcommand{\vect}[1]{\overrightarrow{#1}}
+\renewcommand{\hat}[1]{\widehat{#1}}
+\renewcommand{\tilde}[1]{\widetilde{#1}}
+\newcommand{\proven}{$\hspace{17cm}\square$}
+
+
 % ┌                                                ┐
 % │            STYLE: Computer Science             │
 % └                                                ┘
diff --git a/letter.tex b/letter.tex
index 15c9a21..c387b12 100644
--- a/letter.tex
+++ b/letter.tex
@@ -30,12 +30,12 @@
 
 % Define new letter header
 \setkomavar{firsthead}{
-    \null\hfill
-    \parbox[t][\headheight][t]{4cm}{%
-        \vspace*{2cm}
+	\null\hfill
+	\parbox[t][\headheight][t]{4cm}{%
+		\vspace*{2cm}
 
-        \usekomavar{fromname} \newline
-        \usekomavar{fromaddress}  \newline
-        \usekomavar{fromplace}
-    }
+		\usekomavar{fromname} \newline
+		\usekomavar{fromaddress}  \newline
+		\usekomavar{fromplace}
+	}
 }%