update

bin/com/comport_search.py

@@ -15,9 +15,10 @@ class ComportService:
         if special_port != "":
             self.__working = special_port
         else:
+            print(serial.tools.list_ports.comports())
             while self.__working == []:
                 self.__com_name = serial.tools.list_ports.comports()[self.__pos]
-                if "USB-Serial Controller" or "Prolific USB-Serial Controller" in self.__com_name:
+                if "NXP ARM mbed" in self.__com_name:
                     self.__working = self.__comport.pop(self.__pos)
                 else:
                     self.__pos += 1

bin/com/lib.py

@@ -14,7 +14,7 @@ class Com:
         self.str_input = ""
         self.str_get_input = ""
         self.xs = ""
-        self.__comport = '/dev/ttyUSB0'
+        self.__comport = '/dev/ttyACM0'
 
     def connect(self, baudrate, special_port):
         try:
@@ -47,7 +47,7 @@ class Com:
             return 0
 
     def decode_int(self, value):
-        self.i = int(value, base = 16)
+        self.i = int(value, base=16)
         return self.i
 
     def decode_float(self, value):

bin/data/command_history.csv

@@ -1 +1 @@
-test,,test1,start,stop,stop,start
+test,test,test,test,test,test,test,test,test2,test,test2,test,test,test,test,test,test,test,test,test,,test1,start,stop,stop,start

bin/micro_bit/command_list.py

@@ -0,0 +1,58 @@
+import serial
+import time
+import bin.com.lib
+
+
+lb = bin.com.lib.Com()
+
+
+class CommandListGenerator:
+    def __init__(self):
+        self.__go = 0
+        self.__received = ""
+        self.__start = 0
+        self.__lfcount = 0
+        self.__total = ""
+        self.__output = []
+
+    def run(self, special_port):
+        # This function asks the micro:bit to send a list of all of the commands the program that runs
+        # on it supports. Sent string: "\ncmdl\n". Please note: if using micropython, use the here included
+        # com module to communicate (you can flash it to the micro:bit through the settings menu and also
+        # add your own modules to the micro:bit.
+        try:
+            lb.connect(19200, special_port)
+            self.__go = 1
+        except serial.SerialException as e:
+            return e
+        if self.__go == 1:
+            self.__start = time.time()
+            lb.send("\ncmdl\n")
+            self.__go = 0
+            while time.time() - self.__start < 5:
+                self.__received = lb.receive(1)
+                if self.__received == "\n":
+                    self.__received = lb.receive(1)
+                    if self.__received == "c":
+                        self.__received = lb.receive(1)
+                        if self.__received == "m":
+                            self.__received = lb.receive(1)
+                            if self.__received == "d":
+                                self.__go = 1
+                                break
+        if self.__go == 1:
+            self.__total = ""
+            self.__output = []
+            lb.receive(1)
+            while self.__lfcount < 3:
+                self.__received = lb.receive(1)
+                if self.__received == "\n":
+                    self.__lfcount += 1
+                else:
+                    self.__lfcount = 0
+                    if self.__received == " ":
+                        self.__output.append(self.__total)
+                        self.__total = ""
+                    else:
+                        self.__total += self.__received
+            return self.__output

bin/micro_bit/micro_bit_soft/common/basic_filtering.py

@@ -0,0 +1,5 @@
+class BasicFiltering:
+    def __init__(self):
+        pass
+
+    def standard_lib(self):

bin/micro_bit/micro_bit_soft/decoder/encoder.py

@@ -24,6 +24,7 @@ class Encoder:
                       '(': '-.--.', ')': '-.--.-', ':': '---...',
                       '!': '-.-.--', ' ': '@'}
         self.__input_raw = ""
+        self.__input = ""
         self.__output = []
         self.__pos = 0
         self.check = 0

bin/micro_bit/micro_bit_soft/decoder/log_generator.py

@@ -1,3 +0,0 @@
-class LogGenerator:
-    def __init__(self):
-        pass

bin/micro_bit/micro_bit_soft/decoder/sender.py

@@ -8,4 +8,3 @@ while True:
     else:
         music.stop()
         pin1.write_digital(0)
-

bin/micro_bit/micro_bit_soft/micro_bit_soft.py

@@ -1,3 +1,10 @@
 import microbit
 
-microbit.uart.write()
+
+microbit.uart.init(19200)
+while True:
+    m = microbit.uart.read(1)
+    if m is not None:
+        microbit.display.scroll(str(m))
+    else:
+        microbit.display.clear()

bin/micro_bit/micro_bit_soft/radio_com/basic.py

@@ -0,0 +1,42 @@
+import microbit
+import radio
+
+
+class Basic:
+    def __init__(self):
+        self.__rx = ""
+        self.__decode = 0
+        self.__go = 0
+        self.d = 0
+        self.__x = 0
+        self.__y = 0
+
+    def run(self, group):
+        radio.config(group=group)
+        radio.on()
+        while True:
+            self.receive_p()
+
+    def receive_p(self):
+        self.__rx = radio.receive()
+        try:
+            self.__decode = int(self.__rx)
+            self.__go = 1
+        except TypeError:
+            pass
+
+        if self.__go == 1:
+            for self.i in range(self.__decode):
+                self.d = self.i / 2
+                self.__y = self.d % 4
+                self.__x = self.d // 4
+                if self.__x and self.__y < 4:
+                    microbit.display.set_pixel(self.__x, self.__y, 9)
+                else:
+                    pass
+        else:
+            pass
+
+
+m = Basic()
+m.run(11)

bin/micro_bit/micro_bit_soft/radio_com/run.py

@@ -0,0 +1,30 @@
+import microbit
+import radio
+import basic_filtering
+import struct
+
+
+bf = basic_filtering.BasicFiltering()
+
+
+class RadioCom:
+    def __init__(self):
+        microbit.uart.init(19200)
+
+    def run(self, group):
+        radio.config(group=group)
+        radio.on()
+
+    def inst(self):
+        pass
+
+    def sendpc(self, info):
+        microbit.uart.write(info)
+
+    def listen(self):
+        # listens for messages, sends received text to PC if possible
+        # also returns value, None, if no data is being received
+        radio.receive()
+
+    def send(self, message):
+        radio.send(str(message))

bin/others/run_command.py

@@ -18,9 +18,9 @@ class RunCommand:
             try:
                 com.connect(19200, "")
                 com.send(command)
-                self.__return = "The command executed successfully"
+                self.__return = f"[micro:bit - {command}] The command executed successfully"
-            except serial.SerialException:
+            except serial.SerialException as e:
-                self.__return = f"[micro:bit - {command}]: An error occurred running the command. (Maybe disconnected or no permission?)"
+                self.__return = f"[micro:bit - {command}]: An error occurred running the command. (Maybe disconnected or no permission?) {e}"
         else:
             self.__return = "-micro:bit - No such command"
         return self.__return

main.py

@@ -1,10 +1,11 @@
 #########################################################
 """@package docstring
-Micro:bit Bluetooth Interface, developed by simplePCBuilding, alpha 1.0
+Micro:bit USB / BLE Interface, developed by simplePCBuilding, alpha 1.0
 
-This App allows you to connect to a micro:bit via the USB cable and as such transmit to
+This App allows you to connect to a micro:bit via the USB cable (when the micro:bit is
-and recieve Data from it. This file here is the control file for the UI and as such
+running micropython) or via BLE (when the micro:bit is running a C program) and as such
-should not be interfaced with. All the api files are located in the bin directory."""
+transmit to and receive Data from it. This file here is the control file for the UI and
+as such should not be interfaced with. All the api files are located in the bin directory."""
 #########################################################
 
 # IMPORTS